您好,Dongguan Xiahui Automation Equipment Co., Ltd.网站欢迎您!

专注喷涂设备生产销售及自动化设备方案设计等服务
咨询热线

13649892329

您的位置:Home > Industry knowledge > Content

Maintenance of automatic toy spraying equipment

2020-04-10

The emergence of automatic toy spraying equipment has improved toy spraying work and efficiency. It can be said to be in operation every day. In order to maintain the function and quality of the equipment, the daily protection and maintenance must be done well, then how to do the daily maintenance? Let's take a look with the editor.

1. Before using the equipment every day, you should pay attention to check whether the grounding maintenance is intact. The grounding wire plays an important maintenance effect on the safety of the equipment and personnel, and abnormal grounding is not allowed.

2. Before use, check whether the oil pipe is leaking, whether the gas pipe is leaking, etc., and if any bad phenomenon is found, it can be turned on and operated in time, and the hose and its connection parts should be checked regularly or frequently for leakage.

3. After each shift, scrub the paint stains attached to the inner wall of the spraying space of the paint sprayer and the paint stains attached to the cylinder and hoses to prevent the hoses from hardening, and at the same time clean up all parts of the machine and surrounding work surroundings.

4. Check the pollution and quantity of oil in the motor and turbine box once a week, add or replace the oil if necessary (normally, the oil needs to be replaced once every six months).

5. Check the sprocket and chain lubrication of the toy paint spraying machine once a week and whether the chain is tight. If there is slack, adjust the tension wheel to tighten the chain.

6. Regularly replace the cleaning solvent in the brush box of the paint sprayer, and remove the paint deposits in the box and on the brush.

7. Regularly or frequently remove the paint stains remaining on the conveyor belt of the line toy automatic paint sprayer.

8. The spray gun should always be kept clean and clean it carefully. Except for malfunctions or replacement of spare parts, the spray gun cannot be disassembled at will. Do not drop the spray gun on the ground or hit by other objects.

10. The nozzle of the toy spraying machine is an important component of the spray gun and the key to the spray gun. The nozzle must be maintained and protected from any damage. At the end of each work, they must be washed carefully.

11. The nozzle should be cleaned frequently during the working process, otherwise the spray material attached to the nozzle part will affect the spray quality. When the nozzle of the cleaning toy paint sprayer is clogged, it is not acceptable to use metal such as iron wire to pierce. It should be soaked in a solvent and then blown with compressed air. Metal brushes cannot be used to clean the nozzle.

12. After use, tidy up the paint on the toy paint sprayer and recycle the remaining paint.


Related News

Product Recommended

  • Small side mould machine
  • Small clamp injection...
  • Clamping mold injecti...
  • Hinge mold automatic ...
  • Large clamp mold auto...
  • Intelligent flat spra...