您好,Dongguan Xiahui Automation Equipment Co., Ltd.网站欢迎您!

专注喷涂设备生产销售及自动化设备方案设计等服务
咨询热线

13649892329

您的位置:Home > company's product Clamp mold automatic fuel injection machine High-efficiency small clamp mold automatic fuel injection machine
Small clamp injection machine

Small clamp injection machine

Description

Product model: XH-A015 high-efficiency small clamp injection machine

  • Product details page

Product model: XH-A015 high-efficiency small clamp injection machine

Power supply: AC220V/50HZ Total power: 350W

Features: Small clamp mold and small hinge mold are common, suitable for spraying small products

Product size: length: 530mmX width: 800mmX height: 1450mm

Mold weight: within 1.5KG of a single mold

Effective stroke: left and right 170mmX front and rear 120X up and down 150X spray gun angle 120 degrees X mold 360 degrees rotation

Maintenance of small spraying equipment:

1. Before using the paint sprayer every day, you should pay attention to check whether the grounding protection is intact. The grounding wire plays an important role in protecting the safety of equipment and personnel, and abnormal grounding is not allowed.

2. Before use, check whether the oil pipe is leaking, whether the gas pipe is leaking, etc., and if any bad phenomenon is found, it can be started up and running in time. Check the hose and its connecting parts regularly or frequently to see if there is any leakage. .

3. After stopping each shift, wipe the paint stains attached to the inner wall of the spraying space of the paint sprayer and the paint stains attached to the cylinder and hose to prevent the hose from hardening, and arrange all parts of the machine and surrounding work together surroundings.

4. Check the pollution status and oil volume of the oil in the motor and the worm gear box once a week, add or replace the oil if necessary (the oil needs to be replaced once every six months under normal conditions).

5. Check the sprocket and chain lubrication condition of the paint sprayer once a week and whether the chain is tensioned. If there is slack, adjust the tensioning wheel to tighten the chain.

6. Regularly replace the cleaning solvent in the roller brush box of the paint sprayer, and remove the paint dirt deposited in the box and on the roller brush.

 




Related News

Product Recommended

  • Small side mould machine
  • Small clamp injection...
  • Clamping mold injecti...
  • Hinge mold automatic ...
  • Large clamp mold auto...
  • Intelligent flat spra...