您好,Dongguan Xiahui Automation Equipment Co., Ltd.网站欢迎您!

专注喷涂设备生产销售及自动化设备方案设计等服务
咨询热线

13649892329

您的位置:Home > news > Content

Reciprocating machine manufacturers teach you how to choose spray robots

2020-04-09

Regarding the precautions for the purchase of spraying robots, the reciprocating machine manufacturer Dongguan Xiahui Automation Equipment Co., Ltd. will talk about its own insights, and hope to have some reference effects for you.

1. The scale of the spraying robot's work track.

When selecting a painting robot, it is necessary to ensure that the scale of the robot's trajectory must completely cover the corresponding appearance or cavity of the workpiece to be coated. In intermittent transportation, the spraying robot sprays the workpiece, such as uncovering the relevant appearance or inner cavity of the workpiece.

2. The reciprocation and repeatability of the spraying robot.

For gluing robots, the repeatability is high, generally within 0.5mm. With regard to painting robots, the repeatability requirements are relatively low. At present, the painting robots of major companies can meet general requirements.

3. The speed and acceleration of the spray robot movement.

The spraying robot has a large speed or a large acceleration, and the flying time of the robot is short. In terms of rhythm, the spraying robot has a longer operating time to increase the utilization rate of the spraying robot. It should be pointed out that the speed of the robots are adapted to each other. In the spraying process, the movement speed of the sprayed object is directly related to the characteristics of the sprayed object and material, and needs to be set according to the process requirements.

Fourth, the spraying robot arm can withstand a large load.

According to different spraying occasions, spraying or spraying equipment is equipped during the spraying process to determine the large load that the robot arm bears. Sometimes, in the process of spraying small workpieces, the spray paint also uses the robotic arm to improve the transfer of the workpiece to the small workpiece. This factor should be considered when considering the load of the robot arm.

In order to improve the production efficiency of spraying robots, relevant personnel are required to do daily maintenance and maintenance in time. In order to avoid the presentation of major problems caused by minor problems, spraying robot technicians should regularly check the equipment and perform routine maintenance. Ensure that spraying robot companies continue to produce continuous benefits.


Related News

Product Recommended

  • Small side mould machine
  • Small clamp injection...
  • Clamping mold injecti...
  • Hinge mold automatic ...
  • Large clamp mold auto...
  • Intelligent flat spra...