How to master the correct operating skills of the five-axis reciprocating machine can not only save paint, improve the quality of product coatings, avoid paint waste, but also reduce the scrap rate. So below, I will briefly introduce some operating skills of the reciprocating sprayer when the air spraying process of the five-axis reciprocating sprayer is used.
1. When the five-axis reciprocating spraying is in a normal spraying condition, check whether the paint mist sprayed by the sprayer is in an ideal spraying condition with symmetrical spray, uniform atomization and clear edges. If not, you shouldFive-axis reciprocating spraying machineMake adjustments to adjust the paint mist of the reciprocating sprayer to a good ideal condition. Moreover, there are only a few paint mist particles outside the spray edge, and too many particles will affect the quality of the coating. Moreover, in order to ensure that the reciprocating sprayer can have a satisfactory air intake, the inner diameter of the air compressor air pipe connected to the reciprocating sprayer cannot be smaller than the diameter of the air pipe specified by the modified type.
2. The operation of the air spraying process pressure used by the reciprocating sprayer should be adjusted according to the principle of good spray shape and correct pressure. If the air pressure of the five-axis reciprocating sprayer is operated too high, it will not only increase the wear and tear of the reciprocating sprayer gun, reduce the service life, make the paint rebound and cause paint waste and air pollution, but also affect the spray quality of the product coating. Therefore, when operating the reciprocating sprayer, the paint atomization of the sprayer should be controlled.
3. Before spraying with the five-axis reciprocating spraying machine, the interval between the spray gun and the workpiece should be adjusted. The running speed of the spray gun should also be kept at a constant speed when the spray gun is in the distance. Moreover, the surface of the workpiece sprayed by the reciprocating sprayer should be covered with wet paint, and the overlap amount and number of strokes of the spraying strokes should also be consistent to ensure consistent coating thickness and color.
Dongguan Xiahui Automation has done many successful cases in the fields of automatic spraying line, reciprocating spraying machine and automatic spraying, accumulated rich experience and possessed excellent coating equipment design and manufacturing technology.